Model Excavator Class Torque Range Oil Pressure Speed Range Unit Height Unit Diameter Unit Weight
  tonnes Nm bar rm mm mm kg
3000 Max 2 - 4 959 - 2.877 80 - 240 36 - 100  665 244 71
3500 Max 2.5 - 4.5 1.205 - 3.614 80 - 240  42 - 90  665 244 73
7000 Max 5 - 7 2.133 - 6.931 80 - 260 36 - 81 780 269 112
15000 Max 10 - 15 5.024 - 15.071 80 - 240 20 - 43 930 290 173
25000 Max 15 - 22 16.503 160 - 240 12 - 26 1130 345 269
50000 Max 21 - 45 23.758 160 - 320 11 - 30 1411 406 472

You May Also Like

Chain Trencher

Chain Trencher

Chain Trenchers provide efficient & precise trenching for mixed terrain ground conditions. Allowing you to to produce uniform, smooth sided, flat bottom trenches due to their tungsten teeth / contoured earth teeth.

Excavator Mounted Vibrators

Excavator Mounted Vibrators

Excavator Mounted Vibrators (EMVs) are specifically designed as a sheet piling attachment for excavators. They have a high power to weight ratio due to the high operating frequency and can apply an additional vertical force from the excavator to assist driving if required. This type of excavator mounted sheet pile driver is ideally suited to cohesive, granular soil conditions and can significantly decrease driving time, reduce noise and minimise potentially hazardous vibrations.

Larssen Sheet Piles

Larssen Sheet Piles

Larssen Piles are a type of sheet piling that has an interlocking section which forms a sheet piling retaining wall. Each sheet pile section is connected at 180 degrees from the previous one to form a uniform wall with alternating troughs and peaks. Larssen Sheet Piles are typically used in temporary or permanent cofferdams, retaining walls and foundation construction.

Selector Grapples

Selector Grapples

Selector Grapples are specially designed for the recycling and sorting of aggregates, iron or waste materials. They are particularly useful on sites where there is a need to handle a variety of materials in a short time. Grapple jaws feature Hardox cutting edges and have fast open/close cycles with 360 degree continuous rotation for high productivity.