KOBUS Pipe Puller
About KOBUS Pipe Puller
Replace lead or leaking water pipes in 25% of the time with the KOBUS pipe puller.
Eliminating the need to dig trenches, the system replaces lead, copper and old PVC water supply pipes in around 25% of the time of traditional methods and at much lower cost. Use of the system also ensures that no damage will be caused to other underground cabling or services in the process
- Cost and time savings for water companies and contractors
- Ideal for lead replacement programmes including road crossings
- Minimises disruption to traffic and the general public
- Reduces mess and potential damage for property owners
- Safer for operators and no damage to other buried services
The Kobus pipe puller is an innovative new way to remove lead or leaking water pipes and replace them with new MDPE pipe in a single action. Without the need to dig trenches, the Kobus pipe puller replaces lead, copper and old PVC water supply pipes in around 25% of the time and much less cost of traditional methods.
This not only reduces the time and cost of the work but also ensures that no damage can be caused to other underground cabling or services in the process. It can also replace the crossroad communiactions pipe without affecting the traffic flow.
The KOBUS® pipe puller works by feeding a calibrated steel cable through the pipe to be removed. This cable is pulled into the pipe with a flexible fibre glass rodding system that is previously pushed into the length of pipe to be replaced. The annular space between the old pipe and the steel cable is then filled with KOBITE®, a special bonding solution, which sets to form a composite rope with the lead pipe. The new MDPE pipe is attached to the cable via a special head and as the old pipe is pulled out, the new one replaces it.
The KOBUS pipe puller uses a pipe pulling kit for each pipe that is to be replaced. These kits, available from U Mole, contain the Kobite material, calibrated cable, special head and the fittings required to remove the old pipe.
|Pipe Replacement Diameter
1/2" - 11/2"
|Max Pipe Replacment Length
|Suitable Existing Pipe Materials
|Pulling Force (Tonnes)