Excavator Mounted Vibrator

About Excavator Mounted Vibrators

What is an excavator mounted vibrator?

Excavator Mounted Vibrators (EMVs) are specifically designed as a sheet piling attachment for excavators. They have a high power to weight ratio due to the high operating frequency and can apply an additional vertical force from the excavator to assist driving if required.

What Can an excavator mounted vibrator be used for?

This type of excavator mounted sheet pile driver is ideally suited to cohesive, granular soil conditions and can significantly decrease driving time, reduce noise and minimise potentially hazardous vibrations.

What are the benefits of excavator mounted vibrators?

A key benefit of choosing the Piletec excavator mounted sheet pile driver is the option to mount it via the VibroSafe Quick Hitch Adaptor. This purpose designed adaptor enables the piling hammer to be used with a fully automatic quick hitch coupler; a key safety feature as no operator intervention is necessary. Of course, the EMV may also be mounted via a bracket directly to the dipper arm in the traditional way.

The EMV is of a slim design to enable it to drive between adjacent upstanding piles. If required however, the clamp can be removed and refitted at 90 degrees enabling piling to be carried out close to an existing structure.

In special circumstances, this range of excavator pile driver attachment can easily be operated from a Piletec Powerpack.

 

Specification

Swipe table to view cut off content
Model
MS1 HFB MS3 HFB MS4 HFB
Weight (kg) 350 830 1230
Max. centrifugal force (kN) 90 296 374
Eccentric moment (kgm) 0.7 3 4.2
Max. oil flow (l/min) 102 120 171
Max. working pressure (bar) 300 300 300
Swipe table to view cut off content
  230M (B) 328M (B) 428M (B) 625M (B) 823b E5 FM E7 FM
Eccentric moment (kgm) 2.2 3.2 4 6 8 4.6 6.6
Max. centrifugal force (kN) 220 275 345 410 464 395 452
Max. frequency (rpm) 3000 2800 2800 2300 (2500) 2300 2800 2500
Max. amplitude (incl univ damp) (mm) 7 (6) 9.5 (8.5) 10 (9) 14.5 (13) 19.1 10 16
Max. static line pull (kN) 100 100 120 120 120 120 120
Dynamic weight (incl univ damp) (kg) 640 (720) 660 (740) 795 (900) 825 (930) 940 700 705
Total weight (incl univ clamp) (kg) 875 (1080) 885 (1090) 1065 (1280) 1095 (1300) 1310 1495 1515
Height A (excluding bracket) (mm) 1095 (1320) 1095 (1320) 1145 (1388) 1145 (1388) 1115 1378 1379
Width B (mm) 575 (530) 575 (530) 710 (612) 710 (612) 612 725 767
Length C (mm) 1230 (1115) 1230 (1115) 1300 (1115) 1300 (1115) 1003 1380 1380
Depth D (mm) 258 258 300 300 385 344

344

Power Pack  ICE 100 ICE 100 ICE 180RF ICE 180RF ICE 330RF N/A N/A
How to hire an excavator mounted vibrator from Piletec?

For more information on Excavator Mounted Vibrators (EMVs) and piling equipment hire, simply follow our Contact Us link or ‘Add to Enquiry Basket’ to find out what’s on offer, or send for a product brochure.

You might be interested in

Technical Library

EMV User Guide

EMV User Guide

Equipment User Guide for the use of EMV hammers.

99 Downloads

625 Excavator Mounted Vibrators Technical Data

625 Excavator Mounted Vibrators Technical Data

Technical Data for 625 Excavator Mounted Vibrators

2 Downloads