Dimensions (mm)

Weight

Bending
Capacity

 Lengths
Available
  w t d p kg/m kg/m² KNm/m m
Overlapping                
Standard Lap 330 3.4 35 110 10.9 34.0 7.7 2 to 43
KD4 400 6.0 50 150 22.1 55.6 20.1 3 to 64
KD6 600 8.0 80 120 50.0 83.3

48.3

 3 to 74
HY6 520 6.0 70 125 33.7 64.6 63.26 4 to 74
Interlocking                
GFI 500 6.0 75 230 33.8 67.9 68.9 4 to 75
LP7 700 8.0 151 315 61.9 88.45 127.7 6 to 85

FAQs

Related Files

(447.24 KB)
Trench Sheets Technical Literature
(1.88 MB)
Trench Sheet Driving Plates User Guide

Related Products

SheetMaster 2.0

SheetMaster 2.0

Setting the new standard for installing trench sheets. SheetMaster 2.0 is a revolutionary all-in-one tool that replaces the Quick Release Shackle, Driving Cap, Extractor Clamp, and Lifting Chains. Thanks to innovative SafeRelease ratchet mechanism and integrated driving cap, trench sheets can be lifted, pitched, driven, and extracted without changing attachments, all while eliminating the risk of accidental release.

Larssen Sheet Piles

Larssen Sheet Piles

Larssen Piles are a type of sheet piling that has an interlocking section which forms a sheet piling retaining wall. Each sheet pile section is connected at 180 degrees from the previous one to form a uniform wall with alternating troughs and peaks. Larssen Sheet Piles are typically used in temporary or permanent cofferdams, retaining walls and foundation construction.

Maxi Brace

Maxi Brace

The Maxi Brace is a mid-range, heavy duty, hydraulically adjustable bracing system suitable for supporting clear span square or rectangular excavations ranging from 3m to 12m in size. Higher load capacity and/or longer spans can be achieved by incorporating either cross strutting of knee bracing. Modular extensions are available to further extend beam lengths, however cross strutting is required with these leg configurations.

Trench Sheet Driving Plate

Trench Sheet Driving Plate

The Groundforce Trench Sheet Driving Plate is an alternative to using traditional piling caps when using the ‘dig and push’ method to install trench sheets. The Trench Sheet Driving Plate should always be used in conjunction with a Quick Release Shackle (QRS) to pitch the sheets.