Dimensions (mm)

Weight

Bending
Capacity

Lengths
Available
  w t d p kg/m kg/m² KNm/m m
Overlapping                
Standard Lap 330 3.4 35 110 10.9 34.0 7.7 2 to 43
KD4 400 6.0 50 150 22.1 55.6 20.1 3 to 64
KD6 600 8.0 80 120 50.0 83.3

48.3

3 to 74
HY6 520 6.0 70 125 33.7 64.6 63.26 4 to 74
Interlocking                
GFI 500 6.0 75 230 33.8 67.9 68.9 4 to 75
LP7 700 8.0 151 315 61.9 88.45 127.7 6 to 85

FAQs

What are Trench Sheets and Piles?

Trench sheets and interlocking piles are temporary steel sections driven into the ground to provide structural shoring for excavations. Trench sheets feature a simple, overlapping design ideal for stable, self-supporting soils, while interlocking piles engage securely with each other along their edges to form a continuous, tightly sealed wall.


When should I use overlapping (lapped) sheets?

Overlapping sheets, such as the Standard Lap, KD4, KD6, and HY6, are ideal in self-supporting, dry or cohesive soils. They are best suited for straightforward driving where ground migration between the sheets is minimal.


How do interlocking piles control groundwater in an excavation?

Piles, such as GFI and LP7, feature an interlocking edge design that creates a continuous barrier. This configuration prevents water and fine materials from seeping through the gaps into the excavation zone, where unmanaged groundwater would otherwise compromise the structural stability of the trench walls.


Which bracing systems are best for emergency utility projects?

Lightweight aluminium walers are ideal for emergency utility projects and work well with lighter overlapping sheets like the Standard Lap or KD4. Waler End Bearers can be fitted to safely secure and strengthen open trench ends.


What bracing options are available for deeper excavations?

Waler systems or braces, such as the Groundforce Double Acting Manhole Brace, offer rigid horizontal support. These modular frames accommodate excavations from 2.0m to 6.0m wide and work well with heavy-duty interlocking sheets like the LP7.


How deep can I excavate using an unsupported cantilever sheet system?

Unsupported cantilever sheets, driven without internal frames, rely entirely on their own bending capacity. Because soil loads increase heavily with depth, unsupported cantilevers are strictly restricted to shallow depths, typically up to 1.5m or 2.0m.


How do supported excavation systems achieve greater depths?

Using sheets with a hydraulic bracing frame transforms the setup into a propped beam design. This redistributes heavy lateral loads, allowing high-capacity interlocking light piles to safely reach depths exceeding 4.0m to 6.0m, based on site-specific design and verification.


What is the best way to drive trench sheets?

The best method depends on ground conditions, but the award-winning SheetMaster 2.0 offers an advanced, highly efficient solution. This excavator-mounted tool is mostly controlled from the excavator cab, which greatly improves site safety. Other methods include the use of Excavator Mounted Vibrators (EMVs) or Impact Hammers.


How can I validate my shoring design for Eurocode compliance?

Contractors can use Groundforce’s digital calculation platform, YourSolution. By inputting specific soil data, excavation dimensions, and surcharge loads, the tool generates fully compliant, real-time shoring configurations that adhere to Eurocode standards.


Related Products