Pile Size (mm) Standard Large Mega Super Mega 
  300/600 600/750 750/900 1000/1200
Machine Carrier Class (tonne) 13/20 16/20 20/30 30/40
Oil Flow L/Min 40/120 40/120 75/120 90/120
Operating Oil Pressure Max (bar) 210 210 210/250 210/275
Height (mm) 1250 1300 1500 1800
Width (mm)  1658 1910 2200 2420
Length (mm)   1658 1910 2200 2420

Weight (kg) 

 1400 1600 2300 3500

FAQs

Related Files

(2.22 MB)
Range of Pile Croppers

4 Jaw Pile Cropper

Watch Groundforce Attachments latest 4 Jaw Cropper demonstration video. The 4 Jaw Cropper is used for cutting cast in-situ, contiguous concrete and secant piles from 300mm to 1200mm leaving the rebar intact.

Enquire now

Related Products

CFA Cropper

CFA Cropper

The fast, safe method of reducing cast in-situ, circular, concrete piles. The CFA Cropper will cut circular concrete piles from 300mm diameter and upwards of 1200mm. It’s modular design allows it to be adjusted to suit different pile sizes on site. Using the CFA pile cropper, an average 300mm circular pile can be reduced to your required level in as little as 3 minutes, compared to an average 45 minutes when manually cut using hammers and breakers.

Power Cropper

Power Cropper

The Power Cropper, also known as the concrete muncher, is used for ultra-fast pile reduction and has two functions specifically designed for cutting pre-cast, four bar piles. The Power Cropper is a very powerful machine and can be used in any application, including trenches and other confined spaces. One of the major benefits of the Power Cropper is its ability to retain excess concrete within the body of the machine for easy waste concrete disposal, saving time and ensuring a safer work environment.

Motocut

Motocut

The Motocut pile cutter offers the latest in cutting technology, replacing traditional manual work and improving job safety. The hydraulic driven Motocut is ideal for a range of square concrete piles and performs up to 5 times faster when compared to manual cutting. The machine is also easy to transport to a worksite and can be easily attached to an excavator, ensuring maximum efficiency. The Motocut eliminates the risk of cut piles falling on operators and speeds up site schedule.

Single Bar Pile Cropper

Single Bar Pile Cropper

The Single Bar Pile Cropper is the chosen equipment when cutting square, pre-cast, single reinforcement bar piles. It is lowered onto the pile and using the excavators in-board hydraulics to operate the jaw, it cuts the pile every 200mm, causing the concrete to break away, exposing the rebar and a level finish. All that is left is to cut the rebar to the required height.