Temperature Range Shoring fluid (litres)  Water (litres)  Proportion
Fluid / Water
Greater than 0°C  10 30 1:3
C 20 20 1:1 20 20 1:1
Less than -10°C 40 0 N/A
Approx. Unit Weights (kg)
Empty 100
Full 150
Maximum Delivery Pressure 
Flow (ram out)  2176 Psi (150 bar)
Return (ram in) 2176 Psi (150 bar)

    This 110V, 32A Electric Shoring Pump (for use with Shoring Fluid) is intended for use on sites where conventional combustion engine pumps are not permitted. ALWAYS CHECK SUITABILITY OF THIS PUMP for the environment in which you are working.

    This unit requires a minimum power supply of a 7kVA (32A) generator which can be obtained from Brandon Hire Station (0345 604 5337).

    The pump can also be used in conjunction with the Instagrid Mobile Power Supply. For details on use of the Instagrid, see the relevant user guide which can be downloaded from the Groundforce Technical Library.

    110V Electric Shoring Pumps are intended for use with larger double acting (expanding and retracting) equipment such as hydraulic struts where large fluid volumes are involved. They are also ideal for the installation of multiple braces where the quick release hose connections speed up the installation process. The motor is rated at IP54, so shower proof only: do not submerge or power wash. Note: Always verify the pump's suitability for your specific work environment.

FAQs

Related Files

(1.99 MB)
Instagrid Mobile Power Supply - User Guide
110V Electric Shoring Pump (Shoring Fluid)

110V Electric Shoring Pump (Hydraulic Oil)

110V Electric Shoring Pump (Hydraulic Oil)

This 110V, 32A Electric Shoring Pump is designed to install Groundforce’s hydraulic props and braces using hydraulic oil to expand and retract the rams. It is ideal for sites where combustion engine pumps are restricted or traditional power is not available. Perfect for larger, double-acting equipment requiring high fluid volumes, it also excels at installing multiple braces thanks to its quick-release hose connections. The IP54-rated motor makes it totally weatherproof. It requires a 7kVA (32A) power supply and is compatible with Groundforce’s Instagrid Power Pack or a conventional generator. For an eco-friendly, fully electric operation, pair it with the Instagrid Mobile Power Supply.

Hydraulic Pumps

Hydraulic Pumps

Manual Shoring Pumps provide the means to hydraulically expand, pressurise and retract Groundforce hydraulically operated shoring equipment. Hand pumps are generally recommended for use with smaller equipment where the volume of fluid within the internal rams is relatively small. For larger bracing frames and struts, motorised pumps are recommended.

110V Instagrid GO

110V Instagrid GO

The Instagrid GO Portable Power Supply System offers a high-performance, clean, and portable battery solution, delivering power equivalent to 32A / 110V construction site power. Compact, lightweight, and emissions-free, it delivers grid-level electricity without the noise, fumes, or refuelling demands of a traditional generator. Ideal for use both indoors and outdoors, the Instagrid GO is hand-portable and easy to carry, providing a convenient power source wherever it's needed. With a simple setup and no ongoing maintenance, it offers a practical and sustainable alternative to traditional generators.