Gooseneck Extension

Select Product Size

Please select

EMV Gooseneck x 2.0m

Pile Driver Ext Arm 1m Gooseneck

Pile Driver Ext Arm 2m Goose Neck

The Gooseneck Extension is used to extend the vibrator’s height and reach and is simply mounted on the jib of the excavator. This facility is particularly useful for driving longer piles in soft ground conditions where there is a need to reach over and down embankments or to clear obstructions etc. As well being compatible with the hammer models listed in the table above, the Gooseneck can also be used with the more powerful E5FM and E7FM Excavator Mounted Vibrators.

Add to Basket

Related Files

(2.45 MB)

Gooseneck Extension User Guide

Excavator Mounted Vibrators

Excavator Mounted Vibrators (EMVs) are specifically designed as a sheet piling attachment for excavators. They have a high power to weight ratio due to the high operating frequency and can apply an additional vertical force from the excavator to assist driving if required. This type of excavator mounted sheet pile driver is ideally suited to cohesive, granular soil conditions and can significantly decrease driving time, reduce noise and minimise potentially hazardous vibrations.

Larssen Sheet Piles

Larssen Piles are a type of sheet piling that has an interlocking section which forms a sheet piling retaining wall. Each sheet pile section is connected at 180 degrees from the previous one to form a uniform wall with alternating troughs and peaks. Larssen Sheet Piles are typically used in temporary or permanent cofferdams, retaining walls and foundation construction.

Trench Sheet (Standard)

The standard trench sheet is simple, low weight, durable, steel trench sheet that can be quickly mobilised to support shallow excavations

VibroSafe Quick Hitch Adaptor

The Piletec VibroSafe Quick Hitch Adaptor is a specially developed piece of equipment that is exclusive to Piletec. The VibroSafe connects Excavator Mounted Vibratory Hammers via the excavator’s quick hitch system. The adaptor comes pre-assembled; eliminating the need for the fitting or removal of bolts and pins. The VibroSafe can be used with 90% of all quick hitch systems from 12–25 tonne excavators.